Junction & PTZ Cameras
Four cameras for the moments when one fixed view isn't enough. 180° junction overview, operator-driven incident response, and premium long-range pan-tilt-zoom — all integrated with SenseView.
Two camera types. One platform.
Four cameras for the moments when one fixed view isn't enough. Two Junction Cameras — 180° panoramic devices that cover a full intersection or forecourt from a single mounting point — and two PTZ cameras for operator-driven incident response and long-range investigation.
All four integrate with the SenseView AI platform, including alert-driven PTZ positioning, panoramic-to-PTZ slewing, and a single operator interface for the entire mixed-camera estate.
Wide-area awareness. Active investigation.
A fixed bullet covers a single line. A Junction Camera covers an entire intersection from one device — 180° of wide-area context, all the time, with no operator intervention required. The cameras are passive observers: they don't move, they don't miss the moment, and they record the full scene continuously.
PTZ cameras do the opposite job. They sit unobtrusively until an event fires — either from an operator's joystick or from a SenseView alert — then pan, tilt and zoom onto the specific vehicle, person or activity that warrants closer attention. They're for the moments when wide-area context isn't enough and the question becomes what exactly is happening over there?
Pair them, and the combination is hard to beat: the Junction Camera detects, the PTZ investigates, SenseView correlates the metadata and routes the alert to the operator.
Choose by role.
Most sites end up with one of each — a Junction Camera providing the always-on wide view, and a PTZ for the moments that require detail. Pick a Junction Camera based on the lighting environment; pick a PTZ based on the range and procurement requirements.
180° wide-area, single-device coverage.
Two devices, two architectures. Choose stitched dual-lens for the lowest-light performance, or fisheye for NDAA-eligible procurement.
Junction Camera — 180° Dual-Lens
4K stitched · 2× 4 MP · 25 fps · dual fixed 4 mm · 0.0005 lux F1.0 · 25 m IR · ~1.2 kg
A 180° wide-area Junction Camera built from two stitched 4 MP sensors. The F1.0 dual-lens architecture delivers 0.0005 lux colour video — the best low-light performance across the entire Junction & PTZ range — and a single stitched image covers a full intersection from one mounting point. Lower light, fewer cameras, less cabling.
View CA-1110 →Junction Camera — 180° Fisheye (NDAA)
4K · 25 fps · 1.68 mm fisheye · 15 m IR · 0.012 lux F2.0 · integrated J-box · NDAA · 0.72 kg
The NDAA-compliant Junction Camera. A single 4K fisheye sensor electronically de-warped to 180° panoramic, paired with smart infrared for full-darkness operation and an integrated junction box that simplifies installation. Procurement-eligible for police, government and NDAA-restricted estates.
View CA-1120 →Operator-driven and alert-driven detail.
Two PTZs covering opposite ends of the application spectrum. Entry-level operator dome for incident response within the site; premium long-range for column-mounted area-wide investigation.
PTZ — Entry Operator Dome
3K / 4 MP · 25 fps · 2.8–12 mm 4× zoom · 355° pan / 90° tilt · 50 m IR · 0.005 lux F1.6 · ~1.0 kg
The entry-level PTZ in the range. A compact 4 MP operator dome with 4× optical zoom and full pan / tilt range — suited to incident review where an operator slews the camera to a developing scene rather than relying on the PTZ to drive the scene autonomously. Lightweight, pole-mountable, single-cable install.
View CA-1100 →PTZ — Premium Long-Range (NDAA)
4 MP · 50 fps · 4.7–47 mm 10× zoom · 360° endless pan · NDAA · on-board deep-learning AI · 1.0 kg + pendant
Top of the range. A NDAA-compliant 10× optical zoom PTZ with continuous 360° endless pan, on-board deep-learning AI for object classification, and forensic-grade wide dynamic range. Vehicle classification at 100 m, plate read at 30–40 m. Designed for installation on dedicated columns, poles or lamp posts.
View CA-1130 →Shared platform.
All four cameras integrate to SenseView through the same protocol stack and share consistent installation conventions, even though they cover different roles.
Power and cabling
PoE or PoE+ on every camera. CA-1100, CA-1110 and CA-1120 also accept 12 V DC; CA-1130 takes 24 V DC. For long runs to the 12 V cameras, the NOW Wireless inline adapter converts 24 V Passive PoE down to 12 V inside the mounting box.
ONVIF integration
ONVIF Profile S, T and G across the range — including PTZ control (Profile S) and event metadata (Profile T). Drops into SenseView without bespoke drivers.
Weather and impact rating
IP66 or IP67 weather rating across the range. Vandal-impact ratings: IK10 on CA-1100 and CA-1120, IK09 on CA-1130 (10-joule impact protection). CA-1110 carries IP67 weatherproofing without a separate IK rating. Operating range −20 °C to +60 °C or wider depending on model.
On-camera AI events
Edge analytics on every camera — line crossing, intrusion, region entry / exit — with human and vehicle classification on the NDAA-tier devices.
NDAA procurement
CA-1120 and CA-1130 are NDAA-compliant — eligible for police, government and procurement-restricted estates. CA-1100 and CA-1110 are commercial-tier devices.
SenseView PTZ control
Operator joystick or virtual-joystick control of CA-1100 and CA-1130 directly from the SenseView interface, plus alert-driven PTZ positioning.
Side by side.
The full range at a glance. Use the comparison to match the camera to the application — lighting environment for the Junction Cameras, range and procurement standard for the PTZs.
| SKU | Type | Role | Resolution | Lens / Zoom | Low-light | IR | Audio / I/O | NDAA |
|---|---|---|---|---|---|---|---|---|
| CA-1100 | PTZ | Entry operator dome | 3K / 4 MP | 2.8–12 mm 4× · 355° pan | 0.005 lux F1.6 | 50 m | — | — |
| CA-1110 | Junction | 180° dual-lens low-light | 4K stitched · 2× 4 MP | dual fixed 4 mm | 0.0005 lux F1.0 | 25 m | — | — |
| CA-1120 | Junction | 180° fisheye, NDAA | 4K / 8 MP | 1.68 mm fisheye | 0.012 lux F2.0 | 15 m | Alarm + audio I/O | Yes |
| CA-1130 | PTZ | Premium long-range | 4 MP | 4.7–47 mm 10× · 360° | 0.20 / 0.01 lux F1.6 | — | — | Yes |
Already have cameras? They still work.
SenseView is camera-agnostic. The AI engine accepts video streams and PTZ control from the Junction & PTZ range, from standard third-party CCTV cameras already on your poles, and from existing PTZ cameras already wired into operator workflows.
Existing CCTV — third-party and legacy
If a camera supports ONVIF Profile S, T or G — most do — it can stream into SenseView. The AI engine ingests the video, runs vehicle and person classification, surfaces events, and presents them to operators alongside events from the new Junction & PTZ range. Older cameras without colour-at-night may produce lower accuracy at night, but the analytics still run.
This means estates can be upgraded incrementally: replace the highest-priority cameras with the new range first (typically the ones covering critical junctions or doing long-range investigation), and leave the rest in place until natural end-of-life. SenseView treats the resulting mixed estate as a single platform.
Existing PTZ cameras — operator continuity
SenseView issues ONVIF Profile S PTZ commands to existing PTZ cameras as well as the new CA-1100 and CA-1130. Operators see one joystick, one alarm queue, and one consistent positioning workflow across every PTZ in the estate — whether new or already deployed.
For control-room teams with significant existing PTZ investment, this means the SenseView capability rolls out without retraining operators or replacing working PTZ hardware. Only the central AI engine and the cameras designated for upgrade need to change.
One AI engine. Wide view to zoom view.
The Junction & PTZ range connects to SenseView through ONVIF Profile S, T and G. Live video, recorded footage, PTZ control, AI events and vehicle / human metadata stream through a single operator interface — with the workflow that the wider AI camera estate is built around.
The pairing of a Junction Camera with a PTZ is where SenseView shows its value: the panoramic detects an event in its wide field of view, hands the coordinates to the PTZ, and the PTZ moves automatically to a pre-saved pan-tilt-zoom position covering the location — all without manual intervention. SenseView correlates the metadata, surfaces the alert, and routes it to the operator's screen.
What SenseView delivers — Junction & PTZ
Operator joystick and virtual-joystick PTZ control, alert-driven PTZ positioning, panoramic-to-PTZ slewing on detection, multi-zone AI inference across panoramic frames, vehicle and person classification, ANPR with GDPR-compliant hashing, DVLA lookup integration, line-crossing and intrusion detection, evidential signed-video recording where supported, and a single operator interface across new and existing camera estates.
Specify the Junction & PTZ range.
Talk to our technical team about specifying the right Junction Camera and PTZ pairing for your site, mixed-camera deployment design, and SenseView integration.